Loading platform AMTR-I

Loading platform AMTR-I

Leave review
Intended use

The mechanical AMTR-I bridge is designed for use in all kinds of industrial facilities where an additional docking system is required. It is recommended primarily for logistics facilities where there is a continuous flow of goods.

Standard colours
RAL 9005 RAL 7042 RAL 5010 (two-component resin-based paint)
Heights
550-650 mm
Width
1200-2600 mm
Product datasheet
Download
Read More
Dock leveller AMTRK Basic & Heavy Duty

Dock leveller AMTRK Basic & Heavy Duty

Leave review
Intended use

The swing lip dock leveller is designed for picking up pallets with a forklift to load or unload trucks. The leveller is equipped with a stable hinged plate that ensures quick and safe loading. The leveller has the CE mark. Its platform is made of 6/8 mm thick ribbed sheet metal. It is integrated with the service support and connected to the back of the leveller frame with hinges. Fully secure use is ensured by the anti-slip surface, foot protection along the entire length of the platform and the full lifting range of the leveller. Different methods of placing bridges in the foundation are possible.

Application Nominal
Loading systems
Lengths Nominal
2000, 2500, 3000, 3500, 4000 mm
Widths Structure
2000, 2250 mm
Construction height
610 mm
Nominal lip lengths Sheet metal
400, 500 mm
Sheet metal thickness
(depending on the load capacity)
Nominal load capacity
6-12 tonnes (60-120 kN)
Working ranges above the level
0 to 430 mm
Standard colours
RAL 9005 RAL 7042 RAL 5010 (two-component resin-based paint)
Tank capacity
6 dm3
Working pressure
140 bar
Motor power
1,1 kW
Supply voltage
230/400 V AC
Control voltage
24 V DC
Protection type
IP54
Operating medium
TELLUS T-15 or RANDO HDZ-15 mineral oil
Control
  • the drive system of the leveller is a hydraulic cylinder,
  • the lip is lifted by a separate cylinder, powered separately by a hydraulic unit,
  • closed hydraulic system (maximum pressure 22 bar),
  • smooth adjustment to the vehicle height during loading,
  • single-button control,
  • protection in the event of a power failure or the use of an emergency switch, the leveller is protected against fall – it will stop and maintain the position it was in at the moment,
  • the leveller control system can be coupled with the gate control system.
Dock pan

The main function of the pan is to connect the leveller with the dock. The pan is directly filled with concrete.

Product datasheet
Download
Read More

Dock leveller AMTRV Basic & Heavy Duty

Intended use

The telescopic lip dock leveller is designed for picking up pallets with a forklift to load or unload trucks. Its characteristic feature is a retractable lip guided along bearing rollers. The leveller has the CE mark. Its platform is made of 8/10 mm thick ribbed sheet metal. It is integrated with the service support and connected to the back of the leveller frame with hinges. Fully secure use is ensured by the anti-slip surface, foot protection along the entire length of the platform and the full lifting range of the leveller. Different methods of placing bridges in the foundation are possible.

Standard technical parameters*

Application Nominal

Loading systems

Lengths Nominal

2000, 2500, 3000, 3500, 4000 mm

Widths Structure

2000, 2250 mm

Construction height

710 mm

Nominal lengths of the telescopic lip

500 mm, (1000 mm optional)

Sheet metal thickness

8-10 mm (depending on the load capacity)

Nominal load capacity

6-12 tonnes (60-120 kN)

Working ranges above the level

0 to 430 mm

Standard colours

RAL 9005 RAL 7042 RAL 5010 (two-component resin-based paint)

*Can be adapted according to the customer’s requirements

  • electrical installation
  • hydraulic installation
  • control box
  • straight swing lip
  • platform painted RAL 9005
  • CE declaration of conformity
  • dock leveller with different dimensions and load capacities,
  • 500 mm long telescopic lip,
  • additional anti-slip layer on the driving surfaces of the leveller,
  • structural elements of the leveller painted a selected RAL colour or hot-dip galvanised,
  • the structure of the leveller and all hydraulic elements made of acid-resistant steel,
  • non-standard shape of the swing lip,
  • energy-absorbing, ordinary or reinforced bumpers in non-standard sizes,
  • thermally insulated leveller,
  • additional sealing for an opening of the vehicle's hydraulic plate.

Dock leveller lip AMTRv-PRO

The AMTRV-PRO leveller lip is made of high quality 12 mm thick tread plate, equipped with a robust, reliable, maintenance-free telescopic mechanism. In addition, the lip has a 40 mm chamfer which prevents damage to the wheels of loading devices.

Types of lips

This standard version is designed for most types of loading

with vehicles of the most common sizes.

Cechy charakterystyczne:

  • lip made of 12 mm tread plate,
  • anti-slip properties,
  • better traction of the forklift,
  • ergonomic and safe loading.

The symmetrically cut lip facilitates loading and reduces the risk of damage to

the docked vehicle.

Control

  • the drive system of the leveller is a hydraulic cylinder,
  • the lip is lifted by a separate cylinder, powered separately by a hydraulic unit,
  • closed hydraulic system (maximum pressure 22 bar),
  • smooth adjustment to the vehicle height during loading,
  • single-button control,
  • protection in the event of a power failure or the use of an emergency switch, the leveller is protected against fall – it will stop and maintain the position it was in at the moment,
  • the leveller control system can be coupled with the gate control system.

Tank capacity

6 dm3

Working pressure

140 bar

Motor power

1,5 kW

Supply voltage

230/400 V AC

Control voltage

24 V DC

Protection type

IP54

Operating medium

TELLUS T-15 or RANDO HDZ-15 mineral oil

Dock pan

The main function of the pan is to connect the leveller with the dock.

The pan is directly filled with concrete.

Product datasheet

A separate catalog card is available for each product in our offer.