Dock leveller AMTRV Basic & Heavy Duty

Dock leveller AMTRV Basic & Heavy Duty

Leave review
Intended use

The telescopic lip dock leveller is designed for picking up pallets with a forklift to load or unload trucks. Its characteristic feature is a retractable lip guided along bearing rollers. The leveller has the CE mark. Its platform is made of 8/10 mm thick ribbed sheet metal. It is integrated with the service support and connected to the back of the leveller frame with hinges. Fully secure use is ensured by the anti-slip surface, foot protection along the entire length of the platform and the full lifting range of the leveller. Different methods of placing bridges in the foundation are possible.

Application Nominal
Loading systems
Lengths Nominal
2000, 2500, 3000, 3500, 4000 mm
Widths Structure
2000, 2250 mm
Construction height
710 mm
Sheet metal thickness
8-10 mm (depending on the load capacity)
Nominal load capacity
6-12 tonnes (60-120 kN)
Working ranges above the level
0 to 430 mm
Standard colours
RAL 9005 RAL 7042 RAL 5010 (two-component resin-based paint)
Tank capacity
6 dm3
Working pressure
140 bar
Motor power
1,5 kW
Supply voltage
230/400 V AC
Control voltage
24 V DC
Protection type
IP54
Operating medium
TELLUS T-15 or RANDO HDZ-15 mineral oil
Control
  • the drive system of the leveller is a hydraulic cylinder,
  • the lip is lifted by a separate cylinder, powered separately by a hydraulic unit,
  • closed hydraulic system (maximum pressure 22 bar),
  • smooth adjustment to the vehicle height during loading,
  • single-button control,
  • protection in the event of a power failure or the use of an emergency switch, the leveller is protected against fall – it will stop and maintain the position it was in at the moment,
  • the leveller control system can be coupled with the gate control system.
Dock pan

The main function of the pan is to connect the leveller with the dock.

The pan is directly filled with concrete.

Nominal lengths of the telescopic lip
500 mm, (1000 mm optional)
Product datasheet
Download
Read More
Standard seal AMTR-U

Standard seal AMTR-U

Leave review
Intended use

The AMTR-U mechanical seal is designed to seal a truck trailer at the loading bay. There is no need to use any additional elements to protect the loaded goods, as the seal is fully integrated with the leveller. The main task of the seal is to limit the influence of unfavourable weather conditions on the work in the warehouse. The versatile dimensions of the AMTR-PRO model make it compatible with semi-trailers. Seals with non-standard dimensions can also be designed.

Application Nominal
Loading systems
Standard colours
Black
Heights
3400 mm
Width
3400 mm
Depth
600 mm
Top flap
975 - 1000 mm
Side flap
600 - 675 mm
Product datasheet
Download
Read More

AMTR-S M3 bollard

Intended use

The primary function of the robust bollards is to protect the loading and unloading areas, doors, walls, and all other elements in their vicinity. They are suitable for heavy loads and protecting work areas.

Standard technical parameters*

AMTR-S-800-M3

Nominal height 800 mm | Diameter 219 mm | Wall thickness 5 mm

AMTR-S-1000-M3

Nominal height 1000 mm | Diameter 219 mm | Wall thickness 5 mm

AMTR-S-1200-M3

Nominal height 1200 mm | Diameter 219 mm | Wall thickness 5 mm

AMTR-S-1500-M3

Nominal height 1500 mm | Diameter 219 mm | Wall thickness 5 mm

*Can be adapted according to the customer’s requirements

A model with a diameter of 219 mm and 5 mm thick walls. The right choice for

the entrance to the building. This type of bollard can be used by openings

where there is no loading and unloading leveller

  • galvanised and powder coated in RAL 1023,
  • optionally, two black 100 mm wide strips can be painted on the bollard,
  • all bollards are equipped with an assembly kit.

Product datasheet

A separate catalog card is available for each product in our offer.